Technical solution
Compact, modular and expandable units
A compact unit is a small treatment plant of standard capacity that is supplied and installed faster than a conventional plant; its capacity grows by adding identical units.
Overview
Application
Districts, sub-districts and neighborhoods that need drinking water quickly; airports, sites and camps; and cases where demand grows in stages.
Types of units
- Compact water treatment units: 200 or 400 m³/h per unit, single or grouped.
- Compact wastewater treatment unit: 1,200 m³/day for Basra Airport.
- Containerized desalination unit: pre-treatment and seawater reverse osmosis producing drinking water, 600 m³/day for the Basra Police Training Centre.
Practical benefit
Capacity built to match present demand, investment spread over stages, and common spare parts and operation across units.
From projects in Basra
Compact unit configurations
| Configuration | Description |
|---|---|
| 200 m³/h | Single unit at several sites |
| 2 × 200 and 3 × 200 | Two or three units in parallel |
| 6 × 200 | Six units at one site |
| 400 and 2 × 400 | One or two units |
| 3 × 400 | Three units, including the R-Zero site |
| 6 × 400 | Six units at one site |
| 800 to 1,600 m³/h | Al-Fayhaa, Khor Al-Zubair, Abu Al-Khaseeb and other sites |
Beneficiary of these units: Basra Water Directorate.
Other solutions
Other areas of water solutions
Seawater desalination
Seawater reverse osmosis (SWRO) with pre-treatment, post-treatment and energy recovery.
DetailsBrackish water
Brackish water reverse osmosis (BWRO) at lower pressures and higher recovery than seawater.
DetailsDrinking water
Drinking water plants: coagulation, flocculation, sedimentation, sand filtration and disinfection.
DetailsIndustrial water
Demineralization and water polishing for utilities at industrial and petrochemical facilities.
DetailsWastewater
Biological wastewater treatment, including MBBR, with sludge treatment and disinfection.
DetailsRequest a study or proposal
Start with your project data.
Send us your project data. Our technical team reviews it and comes back with the right next step: a preliminary study, or a technical and commercial proposal.
Data that helps us prepare the proposal
- The water source and a recent analysis of it.
- The required capacity and its unit: m³/day or m³/h.
- The required product-water or effluent quality.
- The project site, available area and power source.
- The scope required: study, supply, or full execution.
- The expected project schedule.