Desalination reference — with WMV
200,000 m³/day desalination line reference
A reverse osmosis desalination line producing drinking water, with energy recovery by pressure exchangers. A reference in cooperation between WMV and Handasat Al-Mualaja.
- 200,000 m³/dayCapacity of the first line
- 1,000,000 m³/dayTotal plant capacity: 5 lines
- 6.0 haPre-treatment and RO unit
- 9 units22,500 m³/day per unit
Overview

- Reference by
- WMV and Handasat Al-Mualaja
- Scope of the reference
- The first 200,000 m³/day line of a plant with a total capacity of 1,000,000 m³/day on 5 parallel lines
- Application
- Desalination plant producing drinking water
- Water source
- Seawater; total dissolved solids 40,260 mg/L design and 45,000 maximum
- Product water
- Drinking water: dissolved solids below 470 mg/L, chloride not above 250, boron not above 2.4 mg/L
- Energy recovery
- PX-Q300 pressure exchangers
What this reference shows
A desalination chain for drinking water that combines dissolved air flotation, dual-media filtration, energy recovery by pressure exchangers, and remineralization with lime and carbon dioxide.
The capacities quoted for the desalination references are line capacities, not the total capacity of the plants they belong to.
Treatment chain
Treatment chain and equipment
- Intake lineAcid and coagulant injection
- Flocculation
- Dissolved air flotation
- Dual-media filtration
- Cartridge filters5 micron
- High pressure and pressure exchangers
- Reverse osmosis units
- Post-treatmentLime and carbon dioxide
Main equipment
| Unit | No. | Main data |
|---|---|---|
| Flocculation basins | 10 | Retention time 11.2 min |
| Dissolved air flotation basins | 10 | Area 106 m²; loading rate 21.2 m/h; recycle ratio 15% |
| Dual-media filters | 22 | 977 m³/h per filter; filtration rate 6.6 m/h; 600 mm anthracite and 1,400 mm sand |
| Filtered-water tank | 1 | Volume 10,600 m³ |
| RO feed pumps | 5 (4+1) | 6,610 m³/h; discharge head 72 m |
| Cartridge filters | 10 (8+2) | 2,644 m³/h per filter |
| High-pressure pumps | 9 | Horizontal centrifugal; 1,073 m³/h; 77.5 bar |
| Booster pumps | 9 | 1,575 m³/h; 4.6 bar |
| Pressure exchangers | 216 | 24 exchangers per train; model PX-Q300 |
| Reverse osmosis units | 9 | 317 pressure vessels and 2,219 membranes per unit |
| Post-treatment | — | Two lime silos and 3 saturators (2+1) of 15.5 m diameter; 4 carbon dioxide tanks of 70 tonnes |
The desalination references used equipment from manufacturers such as Hydranautics (reverse osmosis membranes) and Energy Recovery (PX pressure exchangers). They are named here as technical documentation, not as a statement of agency or commercial representation.
Technical photographs
High pressure and energy recovery
Other projects and references
See other work
Desalination reference — with WMV100,000 m³/day desalination line reference
Two-pass reverse osmosis line for petrochemical utilities, with Pelton turbines and a demineralization unit.
View project
Execution contractWastewater and stormwater stations — Izz al-Din Salim
Mechanical and electrical works for the wastewater and stormwater stations; 75-day duration.
View project
SubcontractorShalamcheh–Basra railway bridge over the Shatt al-Arab
Subcontractor on the railway bridge over the Shatt al-Arab, part of the Iraq–Iran rail link.
View projectRequest a study or proposal
Start with your project data.
Send us your project data. Our technical team reviews it and comes back with the right next step: a preliminary study, or a technical and commercial proposal.
Data that helps us prepare the proposal
- The water source and a recent analysis of it.
- The required capacity and its unit: m³/day or m³/h.
- The required product-water or effluent quality.
- The project site, available area and power source.
- The scope required: study, supply, or full execution.
- The expected project schedule.




